Marble decay induced by thermal strains: simulations and experiments - Agropolis Accéder directement au contenu
Article Dans Une Revue Environmental Earth Sciences Année : 2013

Marble decay induced by thermal strains: simulations and experiments

Résumé

Thermoelastic behavior of different marble types was analyzed using computational modeling and experimental measurements. Eight marble samples with different composition, grain size, grain boundary geometry, and texture were investigated. Calcitic and dolomitic marbles were considered. The average grain size varies from 75 μm to 1.75 mm; grain boundary geometry differs from nearly equigranular straight grain boundaries to inequigranular-interlobate grain boundaries. Four typical marble texture types were observed by EBSD measurements: weak texture; strong texture; girdle texture and high-temperature texture. These crystallographic orientations were used in conjunction with microstructure-based finite element analysis to compute the thermoelastic responses of marble upon heating. Microstructural response maps highlight regions and conditions in the marble fabric that are susceptible to degradation phenomena. This behavior was compared to the measured thermal expansion behavior, which shows increasing residual strains upon repetitive heating-cooling cycles. The thermal expansion behavior as a function of temperature changes can be classified into four categories: (a) isotropic thermal expansion with small or no residual strain; (b) anisotropic thermal expansion with small or no residual strain; (c) isotropic thermal expansion with a residual strain; and (d) anisotropic thermal expansion with residual strain. Thermal expansion coefficients were calculated for both simulated and experimental data and also modeled from the texture using the MTEX software. Fabric parameters control the amount and directional dependence of the thermal expansion. Marbles with strong texture show higher directional dependence of the thermal expansion coefficients and have smaller microstructural values of the maximum principal stress and strain energy density, the main precursors of microcracking throughout the marble fabric. In contrast, marbles with weak texture show isotropic thermal expansion behavior, have a higher propensity to microcracking, and exhibit higher values of maximum principal stress and strain energy density. Good agreement between the experimental and computational results is observed, demonstrating that microstructure-based finite-element simulations are an excellent tool for elucidating influences of rock fabric on thermoelastic behavior.

Dates et versions

hal-00858095 , version 1 (04-09-2013)

Identifiants

Citer

Victoria Shushakova, Edwin R. Fuller, Florian Heidelbach, David Mainprice, Siegfried Siegesmund. Marble decay induced by thermal strains: simulations and experiments. Environmental Earth Sciences, 2013, 69 (4), pp.1281-1297. ⟨10.1007/s12665-013-2406-z⟩. ⟨hal-00858095⟩
110 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More