Fabrication and measurement of strain-free GaAs/AlAs quantum dot devices - Croissance et propriétés de systèmes hybrides en couches minces Accéder directement au contenu
Thèse Année : 2017

Fabrication and measurement of strain-free GaAs/AlAs quantum dot devices

Fabrication and measurement of strain-free GaAs/AlAs quantum dot devices

Résumé

In this thesis the formation of quantum dots (QD) via in-situ droplet nanohole etching, the fabrication and characterization of devices based on these nanostructures is described. The thesis consists of seven chapters. In the first chapter an introduction is given to present the topic to the reader. In the second chapter the experimental methods are presented. In the third chapter, the fabrication method is described and the experimental results obtained in this project are discussed. It will be shown the use of in-situ droplet etching to locally modify the thickness of a modulation doped quantum well, to create QDs embedded in a quantum well(QW) where a two dimensional electorn gas (2DEG) is confined by modulation doping and the embedding of these nanostructures in a n-i-Schottky diode. The effect of these strain-free dots, and the related nanoscale thickness fluctuations of the quantum well, on the 2DEG mobility are discussed in the fourth and in particular in the fifth chapter. In the sixth chapter, the fabrication of a lateral p-n junction based on the QW sample with embedded QD is presented. Following describing the fabrication stages and analysing the influence of each stage on the device, the optical properties of the junction will be discussed. In particular, it will be shown the electroluminescence of a single dot located at lateral the p-n junction. Finally, in the last chapter the conclusion of this work and the future projects are presented.
Dans cette thèse, nous nous intéressons à la croissance de boîtes quantiques par formation de nano-trous in-situ par « droplet-etching » ainsi qu’à la fabrication et caractérisation de dispositifs basés sur ces nanostructures. La thèse comporte sept chapitres. Le premier chapitre est une introduction au sujet et les méthodes expérimentales sont présentées dans le second chapitre. Les méthodes de fabrication ainsi que les résultats expérimentaux obtenus sont discutés dans le troisième chapitre.Nous montrons que l’utilisation in-situ de la méthode de droplet-etching permet de modifier localement l’épaisseur d’un puits quantique à modulation de dopage et créer des boîtes quantiques dans le puits où existe un gaz bidimensionnel d’électrons. Ces nanostructures constituent des diodes n-i Schottky que nous avons étudié. Les effets de ces boîtes quantiques non-contraintes et les fluctuations d’épaisseur à l’échelle nanométrique du puits quantique sur la mobilité du gaz bidimensionnel d’électrons sont discutés dans le quatrième chapitre et cinquième. Le sixième chapitre présente la fabrication d’une jonction p-n latérale basée sur l’échantillon de puits quantique avec des boîtes. Nous discutons les différentes étapes de fabrication et analysons leur influence sur le dispositif, ainsi que leurs propriétés optiques. En particulier, nous démontrons l’électroluminescence d’une boîte unique localisée dans une jonction p-n latérale. Finalement, le dernier chapitre conclue ce travail et en présente les perspectives.
Fichier non déposé

Dates et versions

tel-03985901 , version 1 (13-02-2023)

Licence

Paternité - Pas d'utilisation commerciale - Pas de modification

Identifiants

  • HAL Id : tel-03985901 , version 1

Citer

Valerio Pasquali. Fabrication and measurement of strain-free GaAs/AlAs quantum dot devices. Physics [physics]. Université Pierre et Marie Curie, 2017. English. ⟨NNT : 2017PA066631⟩. ⟨tel-03985901⟩
37 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More