Surface-dependent sulfidation and orientation of MoS 2 slabs on alumina-supported model HDS catalysts - Université Pierre et Marie Curie Accéder directement au contenu
Article Dans Une Revue Journal of Catalysis Année : 2016

Surface-dependent sulfidation and orientation of MoS 2 slabs on alumina-supported model HDS catalysts

Résumé

The constant improvement of hydrotreating (HDT) catalysts, driven by industrial and environmental needs, requires a better understanding of the interactions between the oxide support (mostly alumina) and the MoS2 active phase. Hence, this work addresses the support-dependent genesis of MoS2 on four planar single-crystal a-Al2O3 surfaces with different crystal orientations (C (0001), R ð1 102Þ, M ð1010Þ; and A ð1120Þ). In contrast to classical surface science techniques, which often rely on UHVtype deposition methods, Mo is introduced by impregnation from an aqueous solution in order to mimic standard incipient wetness impregnation. Comparison between different preparation routes, impregnation vs. equilibrium adsorption (selective adsorption), is also considered. Atomic force microscopy, X-ray absorption spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy show that the a-Al2O3 orientation has a clear impact on the strength of metal–support interactions in the oxide state with consequences for the sulfidation, size, stacking, and orientation of MoS2 slabs. Aggregation of molybdenum oxide particles is observed on the C (0001) plane, suggesting weak metal–support interactions leading to a high sulfidation degree with large slabs. Conversely, the presence of well-dispersed individual oxide particles on the R ð1 102Þ plane implies stronger metal–support interactions, leading to a low sulfidation degree and shorter MoS2 slabs. Both A ð1120Þ and M ð1010Þ facets, of similar crystallographic structure, display intermediate behavior in terms of sulfidation rate and MoS2 size, in line with intermediate metal–support interactions. Polarization-dependent grazing-incidence- EXAFS experiments, as well as high-angle annular dark-field (HAADF) scanning transmission electron microscopy analysis, allow us to demonstrate a surface-dependent orientation of MoS2 slabs. Predominant basal bonding is suggested on the C (0001) plane, in agreement with the existence of weak metal–support interactions. Conversely, a random orientation (edge and basal bonding) is observed for the other planes. Generalization of these conclusions to industrial catalysts is proposed, based on comparison of the surface structure of the various model a-Al2O3 orientations used in this work and the predominantly exposed c-Al2O3 surfaces ((110), (100), and (111)).
Fichier principal
Vignette du fichier
JCAT-16-675R1.pdf (2.52 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01487816 , version 1 (13-03-2017)

Identifiants

Citer

Cédric Bara, Anne-Félicie Lamic-Humblot, Emiliano Fonda, Anne-Sophie Gay, Anne-Lise Taleb, et al.. Surface-dependent sulfidation and orientation of MoS 2 slabs on alumina-supported model HDS catalysts. Journal of Catalysis, 2016, 344, pp.591-605. ⟨10.1016/j.jcat.2016.10.001⟩. ⟨hal-01487816⟩
228 Consultations
428 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More