Mechanical design of a distal scanner for confocal microlaparoscope: A conic solution - Université Pierre et Marie Curie Accéder directement au contenu
Communication Dans Un Congrès Année : 2013

Mechanical design of a distal scanner for confocal microlaparoscope: A conic solution

Résumé

This paper presents the mechanical design of a distal scanner to perform a spiral scan for mosaic-imaging with a confocal microlaparoscope. First, it is demonstrated with ex vivo experiments that a spiral scan performs better than a raster scan on soft tissue. Then a mechanical design is developed in order to perform the spiral scan. The design in this paper is based on a conic structure with a particular curved surface. The mechanism is simple to implement and to drive; therefore, it is a low-cost solution. A 5:1 scale prototype is implemented by rapid prototyping and the requirements are validated by experiments. The experiments include manual and motor drive of the system. The manual drive demonstrates the resulting spiral motion by drawing the tip trajectory with an attached pencil. The motor drive demonstrates the speed control of the system with an analysis of video thread capturing the trajectory of a laser beam emitted from the tip.
Fichier principal
Vignette du fichier
ICRA2013_accepted.pdf (1.88 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01765054 , version 1 (12-04-2018)

Identifiants

Citer

Mustafa Suphi Erden, Benoît Rosa, Jérome Szewczyk, Guillaume Morel. Mechanical design of a distal scanner for confocal microlaparoscope: A conic solution. 2013 IEEE International Conference on Robotics and Automation (ICRA), May 2013, Karlsruhe, France. ⟨10.1109/ICRA.2013.6630725⟩. ⟨hal-01765054⟩
42 Consultations
75 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More